RE 92802-01-B/2023-03-27, BoschRexrothAG
General instructions on property damage and product damage | A15VSO/A15VLO series 12 17/60
NOTICE
Danger from chemical or corrosive environmental conditions!
Product can be damaged! If the axial piston unit is exposed to chemical or
corrosive environmental conditions, such as sea water, fertilizer or road salt,
it can result in corrosion or, in extreme cases, malfunction. Leaks may lead to
leakage of hydraulic uid.
▶ Take appropriate measures to protect the axial piston unit from chemical or
corrosive environmental conditions.
Leakage or spilling of hydraulic uid!
Risk of environmental pollution and contamination of ground water!
▶ Always place adrip tray under the axial piston unit when lling and draining
hydraulic uid.
▶ Use asuitable binding agent to collect any leaked hydraulic uid.
▶ Observe the parameters in the safety data sheet for the hydraulic uid and the
specications provided by the machine/system manufacturer.
Danger from hot components!
Nearby products can be damaged! Components which heat up (e.g.,solenoids)
can cause damage to nearby products if they are too close during installation.
▶ When installing the axial piston unit, check the safety distances to nearby
products to ensure that they are not damaged.
The warranty only applies to the machine conguration as delivered.
The warranty will be voided if the product is incorrectly installed, commissioned or
operated, or if it is used or handled improperly.