Bosch rexroth 12 Series - Representation of information

BoschRexrothAG, RE 92802-01-B/2023-03-27
6/60 A15VSO/A15VLO series 12 | About this documentation
Table 1: Required and supplementary documentation
Title Document number Document type
Information on the application of hydrostatic drives at low temperatures
Contains additional information on the application of Rexroth axial piston units
at low temperatures.
90300-03-B Manual
Storage and preservation of axial piston units
Contains additional information on storage and preservation.
90312 Data sheet
1�3 Representation of information
Uniform safety instructions, symbols, terms and abbreviations are used throughout
this documentation to ensure safe and proper use of the product. For clarication,
they are explained in the sections below.
1�3�1 Safety instructions
This documentation contains safety instructions in chapter2.6
"Product-specic safety instructions" on page11 and in chapter3
"General instructions on property damage and product damage" on page15,
as well as before asequence of actions or an instruction for action involving arisk
of personal injury and property damage. Always follow the measures for danger
prevention associated with the use of this product.
Safety instructions are set out as follows:
SIGNAL WORD
Type and source of danger!
Consequences of non-compliance
▶ Danger prevention measures
• Warning sign: draws attention to the danger
• Signal word: identies the degree of the danger
• Type and source of danger: indicates the type and source of the danger
• Consequences: describes the consequences of non-compliance
• Precautions: states how the danger can be avoided
Table 2: Hazard classes as dened in ANSI Z535.6
Warning sign, signal word Meaning
DANGER
Identies adangerous situation that will result in death
orserious injury if it is not avoided.
WARNING
Identies adangerous situation that may result in death
orserious injury if it is not avoided.
CAUTION
Identies adangerous situation that may result in minor
tomoderate injury if it is not avoided.
NOTICE
Property damage: The product or surrounding area may
bedamaged.
1�3�2 Symbols
The following symbols indicate notices that are not safety-relevant but increase
understanding of the documentation.