Bosch rexroth 12 Series - Transport and storage; Transporting the axial piston unit

BoschRexrothAG, RE 92802-01-B/2023-03-27
22/60 A15VSO/A15VLO series 12 | Transport and storage
6 Transport and storage
▶ Always observe the required ambient conditions for transport and storage;
see chapter 6.2 "Storing the axial piston unit" on page 24.
Information on unpacking can be found in chapter7.1
"Unpacking" on page26.
6�1 Transporting the axial piston unit
The following transportation options are available depending on weight and
duration of transport:
• Transport by hand
• Transporting with alifting device (eye bolt or lifting strap)
Table 6: Dimensions and weights (without through drive) A15VSO
Size 110 145 175 210 280
Ground kg 64 79 97 111 143
Width mm Dimensions vary by equipment. The values applicable for
your axial piston unit can be found in the installation drawing
(request if necessary).
Height mm
Depth mm
Weight may vary by equipment.
Table 7: Dimensions and weights (without through drive) A15VLO
Size 145 175 210 280
Ground kg 92 110 125 148
Width mm Dimensions vary by equipment. The values applicable for
your axial piston unit can be found in the installation drawing
(request if necessary).
Height mm
Depth mm
Weight may vary by equipment.
6�1�1 Transport by hand
Up to aspecic maximum weight, axial piston units can be transported by hand
for ashort distance. Observe the national regulations in your country. To prevent
health damage, we recommend renouncing any transport by hand.
CAUTION! Risk of injury due to heavy loads!
Health hazard from carrying axial piston units.
▶ Only manually transport the axial piston unit for ashort period of time.
Observe the national regulations in your country for manual transport.
▶ Always use appropriate lifting, lowering and moving techniques.
▶ Use your personal protective equipment (e.g.safety goggles, safety gloves,
suitableworking clothes, safety shoes).
Dimensions and weights