Bosch rexroth 12 Series - Disposal; Extension and conversion

BoschRexrothAG, RE 92802-01-B/2023-03-27
52/60 A15VSO/A15VLO series 12 | Disposal
12 Disposal
Careless disposal of the axial piston unit, the hydraulic uid and the packaging
material can result in environmental pollution.
Observe the following when disposing of the axial piston unit:
1� Completely drain the axial piston unit.
2� Dispose of the axial piston unit and packaging material in accordance with the
regulations in your country.
3� Dispose of the hydraulic uid in accordance with the regulations of your
country. Also observe the applicable safety data sheet for the hydraulic uid.
4� Disassemble the axial piston unit into its constituent parts for proper recycling.
5� For example, separate the parts into:
– Castings
– Steel
– Aluminum
– Non-ferrous metal
– Electronic waste
– Plastic
– Seals
13 Extension and conversion
Do not modify the axial piston unit and/or its assembled parts. This includes also
the change of the setting screws or the wiring. Changes to settings on the customer
side should only be made using the product-specic setting instructions.
The warranty from BoschRexroth only applies to the product as delivered.
The warranty will be voided if the unit is modied or extended.
Setting screws are protected against unauthorized adjustment by tamper-proof
caps. Removal of the tamper-proof caps will void the warranty. If you need to
change the settings, please contact your local contact person; you can nd their
contact information at
https://addresses.boschrexroth.com