ctrlX SAFETY "SafeMotion"
Fig. 98: SafeMotion report
In the “Comments” field, it is possible to add further information to the report
as free text.
In the “Commissioning engineer” field, enter the person in charge of the Safe-
Motion commissioning of the axis. Afterwards, the report can be saved and
printed (“Save” / “Print” buttons above the report).
The SafeMotion report has to be signed by the person in charge of the commis-
sioning and included in the machine documentation.
NOTE: If not all parameters have been verified, the SafeMotion report cannot
be generated:
To Next Page
Loading...
