ctrlX SAFETY "SafeMotion"
● Motor power supply
●
Monitoring the motor temperature
●
Controlling the motor holding brake
Table 35: Motor power supply
View Identification Function
A1 For power connection U1 at motor
A2 For power connection V1 at motor
A3 For power connection W1 at motor
For equipment grounding connection at
motor
Spring terminal (connector) Unit min. max.
Connection cables
Stranded wire
mm
2
0.5 10.0
AWG 24 8
Stripped length mm 12
Occurring current load and minimum
required connection cross section
A See technical data of device used (I
out
)
Occurring voltage load V See technical data of device used (U
out
)
Includes short circuit protection A1, A2, A3 against each other and each of
them against ground
Table 36: Shield connection
Motor cable shield connection
To Next Page
Loading...
