Standard Title
IEC 60721-3-2 Classification of environmental conditions
Part 3: Classification of groups of environmental parameters
and their severities
Section 2: Transportation
IEC 60721-3-3 Classification of environmental conditions
Part 3: Classification of groups of environmental parameters
and their severities
Section 3: Stationary use at weather-protected locations
Tab. 8-1: Standards used
8.2 CE marking
8.2.1 Declaration of conformity
The electronic products described in the present operating instructions comply
with the requirements and the target of the following EU directive and with the
following harmonized European standards:
EMC directive 2014/30/EC
The electronic products described in the present operating instructions are
intended for use in industrial environments and comply with the following
requirements:
Standard
Title
IEC 61000-6-2 Electromagnetic compatibility (EMC) –
Part 6-2: Generic standards – Immunity for industrial
environments
IEC 61000-6-4 Electromagnetic compatibility (EMC) –
Part 6-4: Generic standards – Emission standard for
industrial environments
Tab. 8-2: Standards for electromagnetic compatibility (EMC)
Loss of CE conformity due to modifications at the device
CE marking applies only to the device upon delivery. After modifying
the device, verify CE conformity.
8.3 UL/CSA certified
IndraControl VPB 40.4 13/57
Standards
R911376309_Edition 02 Bosch Rexroth AG
To Next Page
Loading...
