● IRQ (Interrupt) conflict with other PC hardware components of the control
cabinet PC
● The software of the card was not installed
10.1.6 BIOS settings
No further settings have to be made in the BIOS setup. The corresponding
settings have already been set for the normal operation.
10.2 Housing dimensions
The control cabinet PC can be mounted using mounting holes. For the
corresponding dimensions, please refer to the following figures:
Fix the devices with M5 screws.
IndraControl VPB 40.4 27/57
Mounting, demounting and electric installation
R911376309_Edition 02 Bosch Rexroth AG
To Next Page
Loading...
