the allowed current load at X6. Make sure to comply with the required
minimum current consumption of 100
mA when using the external contact
element. Otherwise, the brake current monitoring unit signals an error.
Connection diagram
Fig. 12-1: Connection of motor temperature monitoring and motor holding brake
Bosch Rexroth AG DOK-INDRV*-SI3-**VRS**-AP06-EN-P
Rexroth IndraDrive Integrated Safety Technology "Safe Torque Off" (as of MPx-16)
122/149
Project planning
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
To Next Page
Loading...
