7.2.2 CCD Master Axis
Enabling of Functional Packages
This application
example additionally requires the base package "Closed-
Loop" and the enabling of the optional functional package "Synchronization".
It is only allowed to enable licensed functional packages!
Fig.7-4: IndraWorks Dialog to Enable the Required Functional Packages for the
CCD Master Axis
Scaling Settings
The screenshot below shows the IndraWorks dialog for setting the scaling.
Bosch Rexroth AG DOK-INDRV*-MLD-APPLI**-AW02-EN-P
Rexroth IndraDrive Rexroth IndraMotion MLD Application Examples
54/97
Synchronous Multi-Axis Motion With Virtual Master Axis
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
To Next Page
Loading...
