Scaling Settings
The scaling
settings for the CCD slave axis are made as for the CCD master
axis.
Establishing Reference
Carry out "set absolute position" procedure or "homing" for the actual position
value 1 (S‑0‑0051).
DOK-INDRV*-MLD-APPLI**-AW02-EN-P
Rexroth IndraDrive Rexroth IndraMotion MLD Application Examples
Bosch Rexroth AG 63/97
Synchronous Multi-Axis Motion With Virtual Master Axis
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
To Next Page
Loading...
