Fig.9-3: Layout of the VDP80 HMI control panel (milling)
Screen with function and machine
keys (1)
Group 1 comprises the screen with the function keys (F-keys) below the screen
and the machine keys (M-keys) to the right of the screen. The F-keys allow
operation of the currently selected screen. The M-keys allow execution of the
machine or control functions referring to this screen.
ASCII keypad (2)
The ASCII keypad can be used to enter values and programs as well as to
select input fields (e.g., using the arrow keys). Each key may have up to three
assignments. To activate the second key level, press the <Shift> key together
with the key to be pressed. To activate the
third key level, press the <Alt> key
together with the key to be pressed.
Example: Pressing key <1> together with <Shift> will produce ". Pressing key
<1> together with <Alt> will produce '.
Selecting the operating area (3)
The operating area keys allow you to quickly switch between screens with dif‐
ferent tasks.
Example: While entering the program, you wish to quickly switch from the pro‐
gram editor to the tools list (Tools) and back (Program).
DOK-MTXMIC-EASY*******-CO04-EN-P
Rexroth IndraMotion MTX micro Easy setup for Standard Turning and Milling Machines
Bosch Rexroth AG 111/141
Operating the IndraMotion MTX micro
To Next Page
Loading...
