Environmental protection and savingNL
the softening salt must be filled
into the softening salt container
immediately before the start of the
program.
Dishwashing detergent can damage the
water softening system.
▶ Only fill the reservoir of the water
softener with dishwasher salt.
Unsuitable detergents can damage
the appliance.
▶ Do not use a steam cleaner.
▶ To avoid scratches, do not use
sponges with a rough surface or
abrasive cleaning agents on the
surface of the device.
▶ To prevent corrosion on
dishwashers with a stainless steel
front, do not use sponge cloths or
rinse them thoroughly several times
before first use.
3.2 Save energy
If you follow these instructions, your
device will use less electricity and
water.
Use the Eco 50° programme.
aThe Eco 50° program is energy-
energy-saving and environmentally friendly.
→
"Programs", Page 19
Change the sensor setting to
Standard.
aThe consumption values are
reduced.
→
"Sensors", page 11
3.3 Sensors
The sensor system adjusts the
program sequence and program
strength of the automatic programs
to the amount and type of dirt.
The sensor system has different
sensitivity levels that you can change
in the basic settings.
→
"Changing basic settings",
page 42
3 Environmental protection and
saving
3.1 Disposal of the packaging
Sensorni-
veau
Description
The packaging materials are
environmentally friendly and can be
reused.
▶ Dispose of the individual
components separately by type.
SE:00 Optimal setting
for mixed operations
load and high
amounts of dirt. Ener-
energy and water saving
run.
11
To Next Page
