NLSet up and connect
Sensorni-
veau
Description
usually shortened.
→
"Overview of the basic settings",
Page 38
→
"Additional features", page 22
SE:01 Fits the program
mastery even in
small quantities
dirt for effective
removal
of food scraps. It
using energy
water consumption is
the corresponding
amended soon.
4 Setup and connection
For correct use, connect the device to
electricity and water in a professional
manner. Observe the required criteria
and the installation instructions.
SE:02 Fits the program
mastery for
heavier usage
circumstances,
example strongly
dried food scraps.
Recommended setting
when using biological
or ecological
dishwashing detergent
len with smaller ones
quantities of work
active substances. It
using energy
water consumption is
the corresponding
amended soon.
4.1 Scope of delivery
After unpacking, check all parts for
transport damage and the
completeness of the delivery.
If you have any complaints, please
contact the store where you purchased
the device or our customer service.
Remark:The device has been checked
at the factory for correct operation.
This may leave water stains on the
device. The water spots disappear
after the first washing cycle.
The delivery consists of:
¡Dishwasher
¡Instructions
¡Assembly instructions
¡Other documents containing information
tie
¡Mounting material
¡Steam protection plate ¡Salt
filling aid funnel
¡Connection cable
¡Quick guide
3.4 Efficient Dry
The appliance door opens
automatically during the drying phase.
This results in particularly economical
drying.
For optimal drying results, it is
advisable to wait until the end of the
program before removing the dishes.
The program has ended when
"00h:00m" appears on the display.
If the automatic door opening is
deactivated, energy consumption
increases and the drying phase
4.2 Setting up and connecting
the device
You can install your under-counter or
built-in appliance in the kitchen unit
between wooden and plastic walls. If you
subsequently use the device as a free
12
To Next Page
