Bosch SBV6ECX00E - Softening Salt; Switching off Water; Softening

NLSoftening system
10.3 Softening salt
3. Note:Only use special salt for
dishwashers.
Do not use salt tablets. Do not
use table salt.
You can soften the water with water.
Fill with softening salt
Pour the softening salt into the
softening salt container.
If the refill softening salt indicator
lights up, top up the softening salt in
the softening salt container
immediately before starting the
program. The consumption of
softening salt depends on the degree
of water hardness. The higher the
water hardness level, the higher the
consumption of softening salt.
NB!
Dishwashing detergent can damage the
water softening system.
▶ Only fill the reservoir of the water
softener with dishwasher salt. The
rinse aid container can be corroded
by dishwasher salt.
▶ To ensure that spilled softening salt
is flushed from the rinse aid
container, the softening salt must
be filled into the softening salt
reservoir immediately before the
start of the program.
Fill the softening salt reservoir
completely with softening salt. The
water in the reservoir is displaced
and flows away.
4.Attach and close the reservoir lid.
10.4 Switch off water
softening
If the salt refill indicator bothers you,
for example if you use a combined
detergent with a salt component, you
can switch off the softener salt
indicator.
1.Open the lid of the salt reservoir
and remove it.
2.When using for the first time: fill the
reservoir completely with water.
Remark
To prevent damage to the
device, only switch off the water
softening in the following cases:
¡The water hardness is max.
times 21 °dH and you use a
combined dishwasher detergent
with salt substitutes. Combined
detergents with salt substitutes can
only be used up to a hardness level
according to the manufacturer's
instructions.
28