Cleaning and maintenanceNL
2.Turn the coarse sieve
counterclockwise
to take
5.Clean the sieve elements under
running water.and remove the sieve system
.
Carefully clean the dirt edge between
the coarse and fine sieve.‒ Make sure that no foreign objects
fall into the pump reservoir.
6.Assembling the sieving system.
Check whether the locking cams of
the coarse sieve are engaged.
2
7.Insert the sieve system into the
device and turn the coarse sieve
clockwise.
‒ Check that the arrow marks are
aligned.
1
3.Pull the micro sieve downwards and
remove it.
17.6 Clean spray arms
Limescale and contaminants in the
washing-up water can block the spray
openings and bearings of the spray
arms. Clean the spray arms regularly.
1.Unscrew the upper spray arm and
pull it downwards
.
4.Press the locking pieces together
and remove the coarse sieve
upwards.
2
1
1
2
47
To Next Page
Loading...
