Softening systemNL
For good washing results, you can
soften water with water softening and
softening salt. To prevent damage to
the device, water with a hardness level
of more than 7 °dH must be softened.
10 Softening system
Hard lime-containing water leaves
limescale residues on the dishes and
the rinse aid container and can clog
parts of the appliance.
10.1 Overview of the water hardness settings
Here you will find an overview of the adjustable water hardness values. You can
request the water hardness from your local water company or determine it with
a water hardness tester.
Water hardness
°dH
Hardness range mmol/l Setting value
0 - 6
7 - 8
9 - 10
11 - 12
13 - 16
17 - 21
22 - 30
31 - 50
soft
soft
average
average
average
hard
hard
hard
0 - 1.1
1.2 - 1.4
1.5 - 1.8
1.9 - 2.1
2.2 - 2.9
3.0 - 3.7
3.8 - 5.4
5.5 - 8.9
H:00
H:01
H:02
H:03
H:04
H:05
H:06
H:07
Remark:Set the appliance to the
determined water hardness.
→
"Setting water softening",
Page 27
With a water hardness of 0 - 6 °dH
you do not need to use dishwasher
salt and you can switch off the water
softening.
→
"Switch off water softening",
Page 28
3.Approx. 3 seconds on
to open the basic settings.
Busy-
aThe display shows H:xx
to give.
aThe display shows
to give.
display
4.Just as often on or
the desired water hardness is set.
press until
10.2 Set water softening
The factory setting is H:04.
5.To save the settings, press for
approx. 3 seconds to press.
Set the device to the water hardness.
1.Determine the water hardness and the
desired setting value.
→
"Overview of the water
hardness settings", Page 27
2.Press.
27
To Next Page
