NLCleaning and maintenance
Perform machine cleaning
6.Press
aMachine cleaning is performed.
.
Comments
¡Run the Machine Cleaning program
went out without any dishes.
¡Only use specifically for dishwashing
washers, suitable machine care
products and machine cleaners.
¡Make sure that no aluminum
um objects, such as grease filters of
extractor hoods or aluminum pans,
are in the washing compartment of
the appliance.
¡If you do not complete the Machine Cleaning
If you carry out 3 washing cycles, the
Machine Clean indication goes out
automatically.
¡To achieve optimal cleaning performance
To achieve this, pay attention to the
correct placement of the cleaners.
¡Take the safety precautions
on the packaging of machine care
products and machine cleaners.
¡Switch the function
→
"Extra Clean Zone", Page 25
in.
aOnce the program is complete,
the indication for Machine Cleaning
goes out.
17.5 Sieving system
The sieve system filters coarse
contaminants from the rinse circuit.
3
2
1
1
microsieve
Fine sieve
coarse sieve
2
3
Cleaning sieves
1.Remove coarse dirt from the
cooking compartment with a damp
cloth.
Contaminants from the dishwashing
water can clog the sieves.
1.Check the sieves for food residues
after every wash.
2.Cleaning the sieves.
3.Place the machine care product in
the interior of the device.
Only use machine care products
specifically suitable for
dishwashers.
4.Pour the machine cleaner into the
detergent dispenser until it is
completely full.
No extra machine
interior space of h
doing.
ecleaner in the
he device
5.Press .
46