NLBasic settings
15 Basic settings
You can set the basic settings of your device according to your wishes.
15.1 Overview of the basic settings
The basic settings depend on the equipment of your device.
Basic setting
Water hardness
Display
text
Choice
H:00 - H:07
Description
H:041 Set water softening to the
water hardness.
→
"Setting water
softening", Page 27
At position H:00 the water
softening is switched off.
Rinse aid
deldosage
r:051 r:00 - r:06 Set the amount of rinse aid.
Switch off the rinse system
with setting r:00.
Sensor setting SE:001 SE:00 - SE:02 Set the water sensor for dirt
detection.
→
"Sensors", page 11
Extra Dry d:001 d:00 - d:01 During the final rinse, the
temperature is increased,
which achieves better drying
results. The running time
may therefore increase
slightly.
Remark:Not suitable for
sensitive items of crockery.
Switch on extra dry
"d:01" or switch off
"d:00".
1Factory setting (may differ depending on device type)
38
To Next Page
