Home ConnectNL
16.1 Quick start with Home
Connect
16.2 Remote Start
You can start the device with your
mobile device via the Home Connect
app.
Connect the device quickly and easily
to a mobile device.
Tip:If you are in the Basic settings
→
Page 41
If you set this function to
"rc:02", the function is permanently
activated and you can start the device
at any time with a mobile device.
Set up the Home Connect app
1.Install the Home Connect app on
the mobile device.
Activate Remote Start
If you have set "rc:01" in the basic
settings of this function, activate the
function on your device.
1
2.Start the Home Connect app and
set access for Home Connect.
Requirements
¡The device is connected to the WLAN
home network connected.
¡The device is connected to the Home Con-
nect app connected.
¡In the Basic Settings
→
Page 41
This function is set to
"rc:01".
¡A program has been selected.
The Home Connect app guides you
through the entire registration process.
Set up Home Connect
Requirements
¡The Home Connect app is available
mobile terminal installed.
¡The device has in place
of setup reception of the home
network (Wi-Fi).
▶ impressions.
When you open the appliance door, the
function is automatically deactivated.
aButton is illuminated.
Tip:To deactivate the function press
to press.
1.Open the Home Connect app and
scan the following QR code.
16.3 Protection of personal
data
Please observe the instructions
regarding the protection of personal
data.
When your device is connected to a
home network connected to the
Internet for the first time, it displays
the following
2.Follow the instructions of the
Home Connect app.
1Apple App Store and the Apple App Store logo are trademarks of Apple Inc.
Google Play and the Google Play logo are trademarks of Google LLC.
43
To Next Page
