NLTroubleshooting
Malfunction Cause and troubleshooting
5.Remove the strainer from the inlet hoseE:32-00 lights up alternately
selend or indication
for water supply
burns.
6.Clean the strainer.
7.Place the strainer in the inlet hose.
8.Screw on the water connection.
9.Check the water connection for leaks.
10.Place the plug back in the socket.
11.Switch on the device.
E:34-00 lights up alternately
seling.
Water flows continuously into the device.
1.Close the tap.
2.Contact the service department
→
Page 58
.
E:61-02 lights up alternately
seling.
No device error. Water drain pump is blocked or the
water drain pump cover is loose.
1.Clean the drain pump.
→
"Clean the drain pump", page 56
2.Securely tighten the drain pump cover.
→
"Clean the drain pump", page 56
50
To Next Page
Loading...
