Bosch SCT 418 - English; Table of Contents

1 689 989 518 | 2022-07-24 Robert Bosch GmbH
1 Notes on the documentation... ...................... 3
1.1 Using the documentation... ............................. 3
1.2 Symbols used in the documentation... ........... 3
1.3 Warnings in the documentation... ................... 3
1.3.1 Meaning of the signal words... ........................ 3
1.3.2 Structure of warnings specic to sections... ... 3
1.3.3 Structure of embedded warnings... ................ 3
2 Safety... .......................................................... 3
2.1 Safety Instructions... ....................................... 3
2.2 Target group... ................................................. 3
2.3 Other applicable documents... ........................ 3
2.4 Intended use... ................................................ 4
2.5 Foreseeable misuse... ..................................... 4
2.6 Prerequisites... ................................................ 4
2.7 Warranty and liability... ................................... 4
3 Product description... .................................... 4
3.1 Scope of delivery... ......................................... 4
3.2 Overview SCT 418 and accessories... ............. 5
3.3 Warnings and mandatory-action signs on the
product... ........................................................ 5
3.4 Functional description... ................................. 5
3.5 Measuring bar... .............................................. 5
3.6 Contact plate... ............................................... 5
3.7 Alignment unit... .............................................. 6
3.8 Mount for large calibration boards (optional)...
........................................................................ 6
4 Initial commissioning... .................................. 7
4.1 Installing SCT 418... ........................................ 7
4.2 Installing the "Bosch ADAS Positioning" soft‐
ware... ............................................................. 7
4.2.1 Installing "Bosch ADAS Positioning" via USB
stick... ............................................................. 7
4.2.2 Installing "Bosch ADAS Positioning" via DDM... .
......................................................................... 7
4.3 Initializing cameras using QR codes... ............ 7
5 Operation... .................................................... 7
5.1 Mounting the wheel holder with reference
board... ........................................................... 7
5.2 Coarse alignment of the SCT 418... ................ 8
5.3 Fine alignment of the SCT 418... ..................... 9
5.4 Attaching calibration boards... ........................ 9
5.4.1 Attaching "calibration boards with retaining
plate and L bracket or T bracket"... ................. 9
5.4.2 Attaching "calibration boards with retaining
plate"... ............................................................ 9
5.4.3 Attaching "calibration boards without retaining
plate"... .......................................................... 10
5.5 Calibrating with the SCT 418... ..................... 10
5.6 Following calibration... .................................. 10
5.7 Moving the indicator bar to parking position... ..
....................................................................... 10
6 Maintenance... .............................................. 11
6.1 Cleaning... ..................................................... 11
6.2 Spare parts... ................................................ 11
7 Decommissioning... ...................................... 11
7.1 Changing location... ...................................... 11
7.2 Temporary shutdown... ................................. 11
7.3 Disposal... ..................................................... 11
8 Technical data... ........................................... 11
8.1 SCT 418 specications... .............................. 11
en | 2 | SCT 418