Bosch Sensixx B35L Repair Instructions

214_58300000171747_ARA_EN_A – 01.03.a Seite 10 von 39
3.9 Storing the appliance
1. Always allow the appliance to cool down before storing it.
2. Set the main power button to the “0” position (the red light will
go off) and disconnect the mains cable.
3. Empty the water tank.
4. Place the iron on the iron pad (2), standing on the soleplate,
and fix it by inserting the tip of the iron into the front slot and
moving the secureLock lever against the heel of the iron.
5. Store the mains cable and steam hose in the storage
compartment. Do not wrap the cords too tight.
6. Use the iron´s handle when moving the appliance, or use the
carrying handles (3) on either side.
3.10 Kind of water to be used
Normal tap water can be used. To prolong the optimum steam
function, mix tap water with distilled water 1:1. If the tap water in your
district is very hard, mix tap water with distilled water 1:2.
You can inquire about the water hardness with your local water
supplier.
The water tank can be filled at any time while using
Attention!
To avoid damage and/or contamination of the water
tank and the boile
r, do not put perfume, vinegar,
starch, descaling agents, additives or any other type
of chemical product into the water tank.

Bosch Sensixx B35L Specifications

General

Iron power	2400 W
Product color	Black, Red
Soleplate type	Aluminum soleplate
Variable steam	-
Water tank capacity	1.4 L
Maximum steam pressure	5 bar
Steam boost performance	- g/min
Vertical steam function	Yes
Cord length	1.8 m
AC input voltage	220-240 V

Weight and Dimensions

Weight	4570 g