214_58300000171747_ARA_EN_A – 01.03.a Seite 6 von 39
3.3 Measuring of the hardness of the water
In order to determine the hardness of the water used for ironing, there
are strips available (ref 056317) that are used as follows:
1. Briefly wet the strip.
2. Shake once.
3. Determine hardness after 1 min:
3.4 Setting the temperature
1. Check the ironing instruction label on the garment to determine
the correct ironing temperature.
2. Turn the temperature selector (14) to the required setting:
3. The indicator lamp (17) will remain lit while the iron is heating
and go out as soon as the iron has reached the selected
temperature.
Tips:
- Sort your garments out based on their cleaning symbol labels,
always starting with clothes that have to be ironed at the lowest
temperatures.
- If you are not sure what the garment is made of then begin
ironing at a low temperature and decide on the correct
temperature by ironing a small section not usually seen when
worn.
To Next Page
Loading...
