Bosch Sensixx B35L Repair Instructions

214_58300000171747_ARA_EN_A – 01.03.a Seite 2 von 39
1 SAFETY
1.1 Safety precautions
Danger!
Repairs should be carried out by personnel from the manufacturer’s
own technical department.
Improper repairs may be harmful to the users.
The appliance should be disconnected from the mains before being
dismantled. Inside there are parts that are subjected to high voltage
levels.
After being repaired, VDE 0701 tests should be conducted or else the
specific standard regulations of the country concerned should be
observed.
The main electricity cable may only be replaced by personnel from the
technical department, using spare cable.
1.1.1 Safety precautions during use
Danger!
Connect and use the appliance only in accordance with the
information supplied on the iron’s specifications plate. Do not connect
the appliance to the power supply in the event of there being visible
signs of damage to the cord or the appliance itself. Keep the
appliance beyond the reach of children.
Only a resilient, steady ironing board should be used. Should the iron
fall or show signs of not being watertight, it should be examined by the
Official Technical Department before being used again.
First unplug the electricity cable from the mains socket before filling
the tank with water. Disconnect the appliance from the power supply
after each use or whenever checking for defects.
So as to avoid potential hazards, repairs and interventions that need
to be carried out on the appliance like, for instance, replacing the cord,
should only be performed by qualified personnel from the Official
Technical Department.
When leaving the place where the ironing is being done, disconnect
the iron from the power supply by removing the cable from the mains
socket.
1.2 Trouble-shooting
Warning!
Never attempt to carry out repairs by means of an indiscriminate
exchange of component parts.
Proceed in a systematic way and pay attention to the technical
documents supplied with the appliance.
The electronic plates should not be repaired, but replaced with original
parts from the manufacturer. Exceptions are listed in separate
documents.
When conducting checks with the appliance open, avoid contact with
parts that are hot or subject to tension.

Bosch Sensixx B35L Specifications

General

Iron power	2400 W
Product color	Black, Red
Soleplate type	Aluminum soleplate
Variable steam	-
Water tank capacity	1.4 L
Maximum steam pressure	5 bar
Steam boost performance	- g/min
Vertical steam function	Yes
Cord length	1.8 m
AC input voltage	220-240 V

Weight and Dimensions

Weight	4570 g