deTroubleshooting
Disturbance Cause and troubleshooting
Device stops in the
program or
skip.
Appliance door is not completely closed.
▶ Close the device door.
Power supply and/or water supply is interrupted.
1.Check the power supply.
2.Check the water supply.
The upper basket presses against the inner door and prevents the
appliance door from closing securely.
▶ Check whether the rear wall of the device is being
dented by a socket or a hose holder that has not been
removed.
▶ Arrange dishes so that no parts of the dishes
protrude over the dish rack and prevent the
appliance door from closing safely.
Disturbance Cause and troubleshooting
Appliance door can be opened
do not close.
Door lock has broken.
▶ Close the appliance door with increased force.
Door closure is blocked due to installation.
▶ Check whether the device has been installed correctly.
The appliance door, the door decor or the
attachments must not hit the neighboring
cabinets and the worktop when closing.
Cleaner lid
chamber can be
do not close.
The cleaner chamber or lid are blocked by sticky
cleaner residue.
▶ Remove any cleaning residue.
Disturbance Cause and troubleshooting
Beating Ge-
noise from the filling valves.
Depending on the house installation. There is no
device error. Does not affect device functionality.
▶ Remedy only possible in house installation.
Beating or
clattering
noise.
Spray arm hits dishes.
▶ Arrange dishes so that the spray arms do not hit
the dishes.
Water jets hit the washing container directly when
there is a small load.
▶ Distribute the dishes evenly.
▶ Load more dishes into the appliance.
Light dishes move during washing.
▶ Store light dishes safely.
60
To Next Page
Loading...
