Bosch VCU - Page 104

16 | Lap Trigger
104/136 Vehicle_Control_Unit_VCU_Manual Bosch Motorsport
Define settings for countdown
timer.
Define settings for segment
timing.
Only applicable for a GPS Laptrigger
Define the latitude and
longitude of the GPS
detection point.
Define the detection
range around the
detection point.
Define the channel
sources for Longitude,
Latitude, Direction and
Speed.
16.1.6 Lap trigger channel diagnosis/counter reset
To display a quick lap trigger channel diagnosis and to reset counters use the diagnosis
page in RaceCon. Any ‘Laptrigger_xxx’ channel can be displayed.
Double-click on any ‘Laptrigger_xxx’ channel in the Data Area. Example: ‘laptrigger_lap-
dist_dls’
A diagnosis window opens in Main Area.