18 | Cloning the Unit
116/136 Vehicle_Control_Unit_VCU_Manual Bosch Motorsport
18 Cloning the Unit
To replace a Vehicle Control Unit VCU by another device, it is possible to clone it. A clone
is a 1:1 copy of a device. This can be useful for copying specific data, like sensor-offset cal-
ibration to a spare unit for a specific car.
Creating a clone file
1. Open the ‘Tools’ window and click on the ‘Clone’ button in the ‘Extras’ menu.
2. Select “Extract” from the dropdown menu.
3. Choose the hardware device, which should be cloned.
4. Define destination and filename.
5. Click ‘OK’ to start procedure.
To Next Page
Loading...
