Firmware | 17
Bosch Motorsport Vehicle_Control_Unit_VCU_Manual 113/136
17 Firmware
17.1 Firmware and configuration
Vehicle Control Unit VCU holds 4 types of data:
Firmware: the software (PST program file) of the Vehicle Control Unit VCU.
Configuration: the configuration of Input channels, CAN I/O, PWM, display configuration,
recording + telemetry configuration.
Calibration data: Characteristic curves and offsets created by online calibration at the
vehicle.
Recorded data: Measurement data recorded during vehicle operation.
17.2 Firmware update
The scheme shows the process during each connection between RaceCon and Vehicle
Control Unit VCU.
To Next Page
Loading...
