Bosch VCU - Configuring Inputs

11 | Analog and Frequency Inputs
50/136 Vehicle_Control_Unit_VCU_Manual Bosch Motorsport
11.2 Configuring inputs
11.2.1 Configuring a predefined Bosch sensor with the
'Bosch Sensor Wizard'
1. Click on ‘Measurement Sources’ in the Toolbox.
2. To expand the list of ‘I/O Channels’, click on ‘+’ in the Vehicle Control Unit VCU Pro-
ject Tree.
3. Drag the “Bosch Sensor Wizard” from the Toolbox and drop it on the desired analog
input channel in the Vehicle Control Unit VCU Project Tree.
Drag + Drop