Bosch VCU - Time-Based Retrigger Protection; Distance-Based Retrigger Protection

Lap Trigger | 16
Bosch Motorsport Vehicle_Control_Unit_VCU_Manual 107/136
Channel Function
Laptrigger_laptime_dls Running laptime
Laptrigger_laptime_best_dls Laptime of best lap
Laptrigger_laptimeold_dls Laptime of last lap completed
Laptrigger_laptimeseg_dls Segment time of last segment
Laptrigger_lapctr_dls Number of completed laps
16.3.1 Time based retrigger protection
Trigger is locked for 5 s after main trigger was received.
To deactivate time based retrigger protection, set ‘Retrigger lock time’ to 0 ms.
Define settings for lap timing
(main trigger).
Define settings for sub trigger.
Not applicable with a GPS lap trigger.
5000ms
Main Trigger
16.3.2 Distance based retrigger protection
Trigger is locked until configured min distance (i.e. 80 % → 3200m) of track distance (i.e.
4000m) has been covered. To deactivate distance based retrigger protection, set min dis-
tance to 0 %.
Change signal for vehicle speed,
if desired.
Enter minimum speed for
trigger release.
Define settings for distance
based retrigger protection.
Define settings for distance
based forced trigger.