8 | Starting Up
22/136 Vehicle_Control_Unit_VCU_Manual Bosch Motorsport
Successful ethernet
connection, DDU
"talks" to PC
If the device turns red, you might need to do a firmware update on the device. For
more information, see chapter “Firmware update [}113]”.
The download starts and the Vehicle Control Unit VCU carries out a reset.
After the reset, RaceCon reconnects to the Vehicle Control Unit VCU. Local configura-
tion on both the PC and Vehicle Control Unit VCU match (indicated by green back-
ground and dot). The Vehicle Control Unit VCU is now connected to RaceCon.
Green background
and dot indicate
matching
configuration
For further information on the color indication, see chapter “Color indication”.
To Next Page
Loading...
