13 | Online Measurement and Calibration
74/136 Vehicle_Control_Unit_VCU_Manual Bosch Motorsport
2. To create the sheets, right-click on Vehicle Control Unit VCU and select ‘Create meas-
urement views…’ from the Vehicle Control Unit VCU context menu.
Click to create
measurement sheets
The automatically created sheet is inserted in the Project Tree under ‘Measurement
Container’ and ‘Device Channels’. If the Vehicle Control Unit VCU is connected to
RaceCon and the status is green, live values of the channels are shown.
13.1.2 Using the measurement sheets
1. When RaceCon is online, press the ‘F11’ key to switch from ‘Design Mode’ into ‘Race
Mode’. The measurement sheet is extended to full screen. The button for offset calib-
ration is active.
2. Switch between different sheets using the tabs at the bottom of the window.
3. Press the ‘Esc’ key to return to ‘Design Mode’.
To Next Page
Loading...
