5
Power Output
Stereo: 65W per channel into 4Ω
50W per channel into 8Ω
70V bridged mono: 100W into 98Ω
70V/4
Ω: 50W @ 70V output into 98Ω
65W @ Ch2 output into 4Ω
Input Sensitivity
315mV required to drive both channels
to full power in any mode.
Input Attenuation
0dB to -
Input Impedance
32kΩ balanced, 11kΩ unbalanced
Line Output Impedance
600Ω
Line Output Distortion
≤0.2%
Frequency Response
(active EQ bypassed)
4Ω output: 40Hz - 16kHz, ±1dB
70V output: 60Hz - 16kHz, ±1dB
THD@ Rated Power
4Ω output: ≤2% THD (40Hz - 16kHz)
70V output: ≤2% THD (60Hz - 16kHz)
Hum and Noise
Line output: 92dB
Power amplifier output: 80dB below rated
output with 4Ω load
Controls
Inputs 1 and 2, input attenuation, remote
volume, bass adjust 1 and 2, Input Mode
and Amplifier Mode switches.
LED Indicators
Power: front panel
Special Features
Remote volume control
Turn on/off muting
Clip detection and limiter
Short circuit protection
DC offset protection
Thermal limiting
Stable into reactive loads
RFI protection
UL and TUV approvals
Terminations
Inputs and outputs are quick-connect
terminal blocks
Optional Accessories
EQ Cards (Model 1B, Models 8 and 25/32)
Source Card
Page Card
Operating Temperature Range
(passively cooled)
12˚F to 120˚F (-10˚C to +50˚C)
AC Power Consumption
350 Watts max, 100/120Vac, 50-60Hz
350 Watts max, 220/240Vac, 50-60Hz
Size
(Desk Mount)
17"W x 10"D x 3 3/4"H
(43.2 x 25.4 x 9.52 cm)
(Rack Mount, chassis supported)
19"W x 10"D x 3 3/4"H
(48.3 x 25.4 x 9.52 cm)
Weight
25 lb (11.3 kg)
Associated Equipment
Rack mount kit
Second zone transformer
AMPLUS™ 100 AMPLIFIER SPECIFICATIONS
∞
To Next Page
