Bowflex Max Trainer M7 - Adjustments and Machine Placement; Leveling the Machine

Assembly / Owner’s Manual
20
Moving the Machine
The machine may be moved by one or more persons depending on their physical abilities and capacities. Make sure that you and others are
allphysicallytandabletomovethemachinesafely.
1. Grasp the Aero Bars to carefully tilt the machine toward you onto the transport rollers. Be sure not to grab the Media Shelf.
Be aware of the Handlebars and the weight of the machine before tilting the
machine.
2. Push the machine into position.
3. Carefully lower the machine into position.
NOTICE: Be careful when you move the machine. All abrupt motions can affect the
computer operation.
Leveling the Machine
ThemachineneedstobeleveledifyourworkoutareaisunevenoriftheRailAssemblyisslightlyofftheoor.Toadjust:
1. Place the machine in your workout area.
2. Loosenthelockingnutsandadjustthelevelersuntiltheyareevenlybalancedincontactwiththeoor.
Do not adjust the levelers to such a height that they detach or unscrew from the machine. Injury to you or damage to the machine can occur.
3. Tighten the locking nuts.
Makesurethemachineislevelandstablebeforeyouexercise.
Adjustments