Bowflex MAX Trainer - Adjustments; Moving the Machine; Leveling the Machine

Assembly / Owner’s Manual
18
Moving the Machine
The machine may be moved by one or more persons depending on their
physical abilities and capacities. Make sure that you and others are all physically
tandabletomovethemachinesafely.
1. Grasp the inner, unmoving part of the Pivot Assembly to carefully tilt the machine
toward you onto the transport rollers.
Be aware of the Handlebars and the weight of the machine before tilting the
machine.
2. Push the machine into position.
3. Carefully lower the machine into position.
NOTICE: Be careful when you move the machine. All abrupt motions can affect the
computer operation.
Leveling the Machine
ThemachineneedstobeleveledifyourworkoutareaisunevenoriftheRailAssemblyisslightlyofftheoor.Toadjust:
1. Place the machine in your workout area.
2. Loosenthelockingnutsandadjustthelevelersuntiltheyareevenlybalancedincontactwiththeoor.
Do not adjust the levelers to such a height that they detach or unscrew from the machine. Injury to you or damage to the machine can occur.
3. Tighten the locking nuts.
Makesurethemachineislevelandstablebeforeyouexercise.
Adjustments