Bowflex MAX Trainer - Console Operation Settings; Console Setup Mode

Assembly / Owner’s Manual
36
TheConsoleSetupModeletsyoucontrolthesoundsettings,orseemaintenancestatistics(TotalRunHoursandSoftwareVersion).
1. Push and hold down the Burn Rate/Increase and PAUSE/END buttons for 3 seconds while in the Power-Up Mode to go into the Console Setup
Mode.
 Note:PushPAUSE/ENDtoexittheConsoleSetupModeandreturntothePower-UpModescreen.
2. The Console display shows the Sound Settings prompt with the current setting. Push the Burn Rate/Increase or Burn Rate/Decrease buttons to
change between the settings of “OFF” and “1” through “7”. A setting of 7 is the loudest sound level.
3. Push ENTER to set.
4. The Console display shows the TOTAL RUN HOURS for the machine.
5. Forthenextprompt,pushtheENTERbutton.
6. TheConsoledisplayshowstheSoftwareVersionprompt.
7. PushtheENTERbuttontoexittheConsoleSetupMode.
The Console will display the Power-Up Mode screen.
Console Setup Mode