Bowflex PR1000 - Attach the Rod Pack

Assembly
Step 10: Attach the Rod Pack
Parts
• CompletedAssembly(fromstep9)
• (1)Bowex®RodPack(#26)
• (1)RodBoxEndPlate(#31)
Hardware
• (3)#10x1”SelfTappingScrews(#7)
• (2)1/4”x1”PhillipsHeadBolt(#13)
• (5)1/4”Washers(#8)
Tools
• PhillipsHeadScrewDriver(notincluded)
10-1 Slide the
Bowflex® Rod Pack into the Rod Pack Holder.
10-2 Install and completely tighten the hardware.
Note: Make sure that the hardware is tightly secured.
26
7
8
13
8
31
Assembly Manual
16