Bowflex PR1000 - Assemble the Seat Rail

Assembly
Step 3: Assemble the Seat Rail
Parts
• SeatRail(#23)
• SeatCushion(#20)
• SeatSlider(#36)
Hardware
• (4)5/16”x3/4”HexHeadBolts(#1)
• (4)5/16”Washers(#9)
• (1)RubberPad(#38)
Tools
• AdjustableWrench(notincluded)
3-1 Slide the Seat Slider onto the Seat Rail.
Note: The threaded hole on the end of the Seat Rail must face upward.
3-2AttachtheSeatCushiontotheSeatSliderwiththeHexHeadBoltsandWashers.Tightenhardware.
3-3 Apply the Rubber Pad to the upper end of the Seat Rail.
20
23
1
9
38
36
Assembly Manual
9