Bowflex PR1000 - Connect the Cables from the Chest Bar and Lat Cross Bar to the Handgrips

Assembly
Step B: Connect the Cables from the Chest Bar and Lat Cross Bar to the Handgrips
Parts
• (2)Handgrips(#15)
B-1 Remove the plastic and unwrap the cables from the Lat Bar Pulleys.
B-2 Attach the Snap Hooks from the Chest Bar Pulleys to the Cables on the Lat Cross Bar.
B-3 Attach the Handgrips to the Snap Hooks from the Lat Cross Bar.
15
Assembly Manual
23