Bowflex PR1000 - Connect the Cables from the Chest Bar to the Leg Extension; Final Inspection

Assembly
Step C: Connect the Cables from the Chest Bar to the Leg Extension
C-1 Remove the plastic and unwrap the cables from the Leg Extension Pulleys.
C-2 Attach the Snap Hooks from the Chest Bar Pulleys to the Leg Extension Cables.
Final Inspection
Inspect your machine to ensure that all fasteners are tight and components are properly assembled.
Donotuseuntilthemachinehasbeenfullyassembledandinspectedforcorrectperformanceinaccordancewith
the Owner’s Manual.
Assembly Manual
24