38
78
77 80
79
If programme P4 has been selected then press button P
and in place of the hour the display will show . In
place of the temperature will appear (fig. 76).
18.7- Press buttons (forward) or (backwards) to
select the desired cycle time from between 5, 10, 15, 20,
25, 30, 35 or 40 minutes (fig. 77).
18.8 - Press button P (fig. 78).
On the display, in place of the hour, will be displayed and,
in place of the indication for the temperature, there will
appear .
18.9- Press buttons (forward) or (backwards) (fig.
79) to select the minimum start-up and shut-down times
between 1 and 5 minutes.
18.10 - Press button P (fig. 80).
On the display, in place of the hour, will be displayed
and, in place of the indication for the temperature, will
appear.
18.11- Press button (forward) or (backwards) (fig.
81) to modify proportional range between 1 and 3°C.
To Next Page
Loading...
