23
5.2 - COOLING PROGRAMME
The memorised cooling programme includes the tem-
perature trend shown in figure 33, where the fixed tem-
perature levels are:
Range T1 24 °C
Range T2 26 °C
Range T3 28 °C
If the pre-memorised programmes correspond to your needs
then the TH350 will not require further programming and
will ready tor immediate operation.
To personalise the built in programmes proceed as outlined
in chapters 6, 7 and 8.
6 DAILY PROGRAMME TEMPERATURE
PERSONALISATION
6.1- Remove the main unit of the unit.
6.2- Use buttons 1÷7 to move the day indicator to posi-
tion 1 (Monday) (fig. 34).
The parentheses for the selected day flash.
6.3- Use buttons 0÷23 to move the flashing indicator
to hour 0 on the Daily programme graphic (fig. 35).
Note. When this button is used, the information on the
display changes as follows:
a) The clock shows the hour indicated by the flashing
segment . The colon between the hours and minutes
does not flash.
b) The temperature shown is the value of the selected level
at the time indicated by the flashing segment.
34
32
33
To Next Page
Loading...
