43
Data saved after a reset Data not saved after a reset
- Calibration temperature
- Automatic advance selection
- Differential or proportional integral mode
- Differential temperature
- Integral proportional programme
- Cycle time
- Minimum system start-up time
- Proportional range
- Heating/cooling mode
- Winter temperature for fixed-time manual
- Number of hours for winter fixed-time manual
- Number of days for winter fixed-time manual
- Summer temperature for fixed-time manual
- Number of hours for summer fixed-time manual
- Number of days for summer fixed-time manual
- Ranges T1, T2 and T3 winter and summer
- Summer and winter timer programme
- Activation delay (15, 30 or 45 minutes) for each hour
- Minutes, hours, days of week
- Automatic, manual, Frost Protection or OFF mode (
1
)
- Manual temperature
- Frost Protection temperature
- Self-learning parameters for automatic advance
(
1
) When the thermostat is reset in FROST PROTECTION
or OFF mode it will restart in AUTOMATIC HEATING mode.
Table 2