9
INTERNAL CONTROLS
To access the internal control buttons extract the tab L
and pull the main unit of the thermostat forwards until it
is blocked as indicated in fig 2.
24 R Reset.
25 Setting the clock and the start-up and
shut-down delay period.
26 P Temperature programming in the three
ranges T1, T2, T3.
Setting of operating parameters.
27 COOLING ( ) HEATING ( ) or OFF MODE
programme selection.
28
0÷23 Decrease of the hour within the ‘Daily’
programme display.
29 0÷23 Increase of the hour within the ‘Daily’
programme display.
30 1÷7 Select the day.
31 C Copy programme.
To Next Page
Loading...
