SPECIFICATIONS
STUMP GRINDER
9779 8-4-14-2
A
B
C
D
E
DESCRIPTION SPECIFICATION
A. Overall Width ................................................................................................ 58.00"
B. Overall Height ............................................................................................... 37.00"
C. Overall Length .............................................................................................. 73.00"
D. Below Ground Depth .................................................................................... 12.00"
E. Swing Arc ......................................................................................................... 60°
F. Maximum Lift ...................................................................................................43°
Number of Cutting Teeth ........................................................................................28
STANDARD HIGH
FLOW FLOW
Wheel Diameter ..........................................................26.00" ............................30.00"
Hydraulic Flow Requirement .................................. 16-22 GPM ....................25-40 GPM
Weight (lbs) .................................................................720# ..............................795#
Stump Height (with gouser pads on the ground
and measuring to centerline of cutting wheel) ......... 30" ..................................30"
F
SPECIFICATION AND DESIGN ARE
SUBJECT TO CHANGE WITHOUT
NOTICE AND WITHOUT LIABILITY
THEREFORE.
To Next Page
Loading...
