Brady BMP21 - File Management; Saving and Opening Files

File Management
12 BMP21 User Guide
File Management
Saving and Opening Files
To save a file:
1. With the last label still in your editor, press , then select File and press
Enter .
2. Select Save, then press Enter
Note: You can save labels to 12 locations. If a name is next to the number, a
label is currently being stored in that location.
3. Move your cursor to a number where you want the label saved, then
press Enter .
4. Type the label file name: ONE, then press Enter .
5. Press + to clear the display
.
To open a saved label:
1. Press , then select File.
2. Press Enter , then select Open.
3. Press Enter .
4. Move the cursor to the number and name of the saved label.
5. Press Enter . Your file is displayed on the screen.