Brady BMP21 - Saving and Opening Serialization Files

File Management
BMP21 User Guide 15
Saving and Opening a Serialization File
1. Press Label Type .
2. Select Banner Landscape, then press Enter .
3. Type: 12345, then press .
4. Select Serial and Increment By 01.
5. Press
T to End, then X arrow until the screen reads: 12347.
- or -
Type: 347.
6. Press
T to Copies, then X arrow until the screen reads: 02.
7. Press Enter .
8. Press and select File.
9. Select Save and press Enter .
Note: You can save labels to 12 locations. If a name is next to the number, a
label is currently being stored in that location.
10. Move your cursor to a number where you want the serialization label saved,
then press Enter .
11. Type the label file name: SERIAL, then press Enter .
12. Press Print.
13. When your serialization file is printed, press + to clear the
display.