Brady BMP21 - Replacing a Label File

File Management
BMP21 User Guide 13
Replacing a Label File
To replace a file previously saved:
1. Press + to clear your editor.
2. Press , then select Symbol.
- or -
Press + .
3. Select any symbol and Enter .
4. Type: SAMPLE
5. Press , then select File.
6. Press Enter .
7. Select Save, the press Enter .
8. Move the cursor to the number and name of your last saved label, then press
Enter .
9. When prompted to replace the file, select Yes.
10. Type the label file name: NEW, then press Enter .
11.
Press + to clear the display.