2.3 Print Values
This function gives a printout of the settings which are currently active in the Printer; It also gives
information about the 8 ASCII-tables in the Printer.
When Print Values is used, the Line Length setting must be at least 36 characters. If not, this message will
appear in the display:
NB! Line Length
Minimum 36 Char.
To be able to print the current values, change the line length to min. 36 characters.
Print Values might look like this:
BRAILLO NORWAY
VERSION 000.19 D
CURRENT VALUES
COMMUNICATION = SERIAL
BAUD RATE = 9600
PARITY = NO
DATA BIT = 8
STOP BIT = 1
SHEET LENGTH = 12
LINE LENGTH = 42
PRINT = DOUBLE
LAYOUT = NORMAL
PAGE 1 = UP
DOT = 6
LINE SPACING = NORMAL
LINE SING/DOUB = SINGLE
PAGE ADJUST = MAX
PAGE MARGIN = NORMAL
SHEET COUNTER 1= 87654321
ASCII TABLE
NO 2 = ENGLAND 6 DOT 044.00
ENGLAND 8 DOT 044.00
"Sheet counter" shows the number of printed sheets (Not pages!). This is the same counter as on the right-
hand side of the display. "ASCII table" shows which ASCII-table is active.
To Next Page
Loading...